Table of Contents
Advertisement
Chapter 4
AUSM Command Reference
Related Commands
addrscprtn, delrscprtn, dsprscprtn
Attributes
Log: Yes
Example
The following example changes the default lower VCI value to 35 and leaves all other resource partition
values set to the default values.
PXM1E_SJ.1.1.AUSMB8.a > cnfrscprtn 1 2 100 100 0 255 35 65535 1 1000 1000 2
PXM1E_SJ.1.1.AUSMB8.a >
Tip
Several specifications reserve VCI values in the range of 0 through 35. If you are not familiar with these
specifications and want to avoid potential conflicts, set the lower VCI value to 35.
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
State: Active
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
cnfrscprtn
4-79
Advertisement
Table of Contents
