Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference page 181

Chapter 4 AUSM Command Reference
Example
Display the configuration for IMA group 2 on the current card.
PXM1E_SJ.1.1.AUSMB8.a > dspaimgrp 1
IMA Group number
Port type
Lines configured
Enable
IMA Port state
IMA Group Ne state
PortSpeed (cells/sec)
GroupTxAvailCellRate (cells/sec) : 14364
ImaGroupTxFrameLength(cells)
LcpDelayTolerance (IMA frames)
ReadPtrWrPtrDiff
Minimum number of links
MaxTolerableDiffDelay (msec)
Lines Present
Observed Diff delay (msec)
Clock Mode
GroupAlpha
GroupBeta
GroupGamma
GroupConfiguration
IMAGrp Failure status
Timing reference link
ImaGroupTxImaId
ExpectedGroupRxImaId
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
(cells)
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
: 1
: NNI
: 1.2.3.4
: Enabled
: Active
: operational
: 14364
: 128
: 1
: 4
: 3
: 275
: 1.2.3.4
: 0
: CTC
: 2
: 2
: 1
: 1
: No Failure
: 1
: 0x0
: 0x0
dspaimgrp
4-107