Table of Contents
Advertisement
cnfconstdabr
nrm
trm
tbe
frtt
adtf
cdf
Related Commands
addcon, cnfconabrparms, cnfconabrrates, dspcon, dspcons, dspconstdabr
Attributes
Log: Yes
Example
Configure the Standard ABR connection to emulate the source/destination or terminating behavior of the
TM 4.0 specification.
pxmsjc.1.11.AUSMB8.a > cnfconstdabr 27 2 10 1500 100 128 16 64 255 16777215 0 500
16
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-64
Inrate cell count is the maximum number of cells a source may send for each
forward RM cell.
Range: 2–256
Maximum delay for FRM provides an upper bound on the time between forward
RM cells for an active source.
Range: 3–255 msec
Transient buffer exposure is the negotiated number of cells that the network
would like to limit the source to sending during startup periods, before the first
RM cell returns.
Range: 0–16777215 cells
Fixed round trip time is the sum of the fixed and propagation delays from the
source to the furthest destination and back.
Range: 0–16700 msec
The ACR decrease time factor permitted between the sending RM cells and
before the rate is decreased to ICR.
Range: 10–10230
Cutoff decrease factor controls the decrease in ACR associated with CRM.
Range: 0–64
State: Active
Privilege: Group 2
Chapter 4
AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Advertisement
Table of Contents
