Clralmcnt - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

clralmcnt

Clear Alarm Counters
Use the clralmcnt command to clear the alarm counters for a line on the current AUSM card.
Syntax
clralmcnt -ds1 <line>
Syntax Description
line
Related Commands
clralmcnts, dspalmcnt
Attributes
Log: No
Example
Clear the alarm counters for line 2 on the current AUSM card.
PXM1E_SJ.1.21.AUSMB8.a > clralmcnt -ds1 2
PXM1E_SJ.1.21.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Line number for the line you want to display the alarm configuration. Use dsplns
to view the available lines.
State: Any
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 5
clralmcnt
4-33