Managing The Switch; Displaying Information About The Installed Hardware Modules - Cisco Nexus 9504 Hardware Installation Manual

Managing the Switch

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Displaying Information About the Installed Hardware Modules

You can display information about the switch hardware and the hardware modules installed in the switch
chassis by using the show hardware command.
switch# show hardware
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Displaying Information About the Installed Hardware Modules, page 35
Displaying the Hardware Inventory for a Switch, page 38
Displaying the Backplane and Serial Number Information, page 39
Displaying Environmental Information for the Switch, page 41
Displaying the Current State of a Module, page 42
Displaying Temperatures for a Module, page 44
Connecting to a Module, page 45
Saving the Module Configuration, page 46
Shutting Down or Starting Up a Module, page 47
Purging a Nonfunctioning Module from the Running Configuration, page 47
Displaying Power Usage Information, page 48
Power Cycling a Module, page 49
Rebooting a Switch, page 49
Overview of Supervisor Modules, page 50
Overview of I/O Module Support, page 51
Overview of Fabric Modules, page 52
Overview of Power Modes, page 53
Overview of Fan Trays, page 57
C H A P T E R
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
5
35