Dellnloop - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dellnloop

dellnloop
Delete Line Loop
Use the dellnloop command to remove the line loopback feature from a line.
Syntax
dellnloop <line_num>
Syntax Description
line_num
Related Commands
addlnloop, dspln, dsplns
Attributes
Log: Yes
Example
Remove line loopback from line 8 on an AUSM card.
PXM1E_SJ.1.21.AUSMB8.a > dellnloop 8
PXM1E_SJ.1.21.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-100
Number of the line to be removed from loopback. Enter the dsplns command to
view the available lines. Use the dspln command to determine if a line is in
loopback mode.
State: Active Privilege: Service Group
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002