Dspaimgrpcnt - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dspaimgrpcnt

dspaimgrpcnt
Display AIM Group Counter
Use the dspaimgrpcnt command to view the failure count for a specific IMA group on the current
AUSM card.
Syntax
dspaimgrpcnt <group_num>
Syntax Description
group_num
Related Commands
clraimgrpcnt, clraimlncnt, dspaimgrp, dspaimgrps, dspaimlncnt, dspimainfo
Attributes
Log: No
Example
Display the failure count for IMA group 2 on the current card.
PXM1E_SJ.1.1.AUSMB8.a > dspaimgrpcnt 2
IMA Group number:
Ne Number of failures
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-108
Enter the number for the IMA group you want to display. Use the dspimagrps
command to display the configured IMA groups.
State: Active Privilege: Group 1
Chapter 4
2
: 0
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
AUSM Command Reference