Chapter 4
AUSM Command Reference
clralms
Clear Alarms
Use the clralms command to clear active alarms on all lines of the current AUSM card. The alarms will
not clear if the alarm cause is still present.
Syntax
clralms
Syntax Description
None
Related Commands
clralm, dspalm, dspalms
Attributes
Log: No
Example
Clear the active alarms for all lines on the current AUSM card.
PXM1E_SJ.1.21.AUSMB8.a > clralms
PXM1E_SJ.1.21.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
State: Any
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 5
clralms
4-35