Dspalm - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

dspalm

dspalm
Display Alarm
Use the dspalm command to display the active alarms associated with a specific line on the current
AUSM card.
Syntax
dspalm -ds1 <line>
Syntax Description
line
Related Commands
clralm, clralms, dspalms
Attributes
Log: No
Example
Display the alarms for line 2 on the current AUSM card.
PXM1E_SJ.1.21.AUSMB8.a > dspalm -ds1 8
LineNum:
LineAlarmState:
LineStatisticalAlarmState: No Statistical Alarms
PXM1E_SJ.1.21.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-112
Line number for the line you want to display. Use dsplns to view the available
lines.
State: Any Privilege: Any User
8
No Alarms
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002