Chapter 4
AUSM Command Reference
dspaimgrps
Display Status and Configuration of All AIM Groups
Use the dspaimgrps command to list the configured IMA groups on the current AUSM card.
Syntax
dspaimgrps
Syntax Description
None
Related Commands
addaimgrp, addlns2aimgrp, cnfaimgrp, delaimgrp, dellnsfmaimgrp, dspaimgrp
Attributes
Log: No
Example
Display a list of the IMA groups on the current card.
PXM1E_SJ.1.1.AUSMB8.a > dspaimgrps
List of IMA groups:
===================
ImaGrp PortType Conf
------ -------- ----- -----
1.1
1.2
NextPortNumAvailable:
PXM1E_SJ.1.1.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
State: Active
Avail
rate
rate
NNI
14364 14364
NNI
14364
0
5
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Group 1
Lines configured
Lines present
---------------
--------------- --------- ----------
1.2.3.4
1.2.3.4
5.6.7.8
dspaimgrps
Tol Diff
Port State
Delay(ms)
275
Active
275
Sig. Failure
4-109