Chapter 4
AUSM Command Reference
dspcd
Display Card
Use the dspcd command to display information regarding the hardware, software, and operational status
of the current AUSM card.
Syntax
dspcd
You can also display card information by entering the dspcd command on the PXM1E with the
Note
appropriate slot number. For example: dspcd 21. The command report that appears is different from the
report that appears when you enter the dspcd command on the AUSM card.
Syntax Description
None
Related Commands
version
Attributes
Log: No
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
State: Any
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Any User
dspcd
4-119