Setcmdc - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

Chapter 4 AUSM Command Reference

setcmdc

Set Command Completion
Use the setcmdc command to enable or disable the command completion feature. When enabled, this
feature responds to incomplete commands by displaying a list of commands that match the incomplete
command entry.
Syntax
setcmdc <on|off>
Syntax Description
None
Related Commands
None
Attributes
Log: No
Example
Enable the command completion feature.
PXM1E_SJ.1.21.AUSMB8.a > setcmdc on
PXM1E_SJ.1.21.AUSMB8.a >
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
State: Any
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Any User
setcmdc
4-185