chkflash
chkflash
Check Flash
Use the chkflash command to display the length of the boot software file and the status of the checksum.
Syntax
chkflash
Syntax Description
None
Related Commands
dspcd, version
Attributes
Log: No
Example
Check the boot software status on the current AUSM card.
PXM1E_SJ.1.21.AUSMB8.a > chkflash
Program length = 377836
Calculated checksum = 3818c59a stored checksum = 3818c59a
Flash checksum passed
PXM1E_SJ.1.21.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-28
State: Any
Privilege: Strata Group
Chapter 4
AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002