Table of Contents
Advertisement
Chapter 4
AUSM Command Reference
dspalmcnt
Display Alarm Counters
Use the dspalmcnt command to display the alarm counters for a line on the current AUSM card. The
alarm counters indicate how many times each type of active alarm has occurred since the counters were
last reset.
Syntax
dspalmcnt -ds1 <line>
Syntax Description
line
Related Commands
clralmcnt
Attributes
Log: No
Release 3, Part Number 78-14254-01 Rev. A0, October 2002
Line number for the line for which you want to display the alarm counters. Use
the dsplns command to view the available lines.
State: Any
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
Privilege: Any User
dspalmcnt
4-115
Advertisement
Table of Contents
