Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference page 100

addspvc
Related Commands
cnfcon, delcon, dncon, dspcon, dspcons. rrtcon, tstcon, upcon
Attributes
Log: Yes
Example
The following addspvc command defines a port as the slave side of an SPVC connection. Note the slave
Local Connection ID shown at the end of the display.
PXM1E_SJ.1.4.AUSMB8.a > addspvc 1 100 100
Local Connection Id is : 4700918100000000016444445c00000101230100.100.100
PXM1E_SJ.1.4.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-26
State: Active Privilege: Group 2
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002