Cnfcdrscprtn - Cisco MGX 8850 PXM1E Software Configuration Manual And Command Reference

cnfcdrscprtn

cnfcdrscprtn
Configure Card Resource Partition
A card resource partition defines the maximum number of logical connections (LCNs) that is assigned
to each controller's resource partition when a new ATM port or IMA group is created. Use the
cnfcdrscprtn command to modify the maximum number of LCNs assigned to all ports and IMA groups
as they are created.
Syntax
cnfcdrscprtn <number_PAR_conns> <number_PNNI_conns> <number_TAG_conns>
Syntax Description
number_PAR_conns
number_PNNI_conns
number_Tag_conns
Related Commands
delcdrscprtn, dspcdrscprtn
Attributes
Log: Yes
Example
Configure the card resource partition to use the maximum number of LCNs on new ports and IMA
groups.
PXM1E_SJ.1.1.AUSMB8.a > cnfcdrscprtn 1000 1000 1000
PXM1E_SJ.1.1.AUSMB8.a >
Cisco AUSM Software Configuration Guide and Command Reference for MGX 8850 (PXM1E) and MGX 8830
4-54
Maximum number of PAR connections.
Range: 1–1000
Maximum number of PNNI connections.
Range: 1–1000
Maximum number of MPLS connections.
Range: 1–1000
State: Active Privilege: Group 1
Chapter 4 AUSM Command Reference
Release 3, Part Number 78-14254-01 Rev. A0, October 2002