Toshiba e-STUDIO 2555C Service Manual page 542

* J8: Transfer belt cleaning blade
• Handling precautions
Pay attention to the following points as the cleaning blade life is determined by the condition
of its edge.
- Do not allow hard objects to hit or rub against blade edge.
- Do not rub the edge with a cloth or soft pad.
- Do not leave oil (or fingerprints, etc.) on the edge.
- Do not apply solvents such as paint thinner to the blade.
- Do not allow paper fibers or dirt to contact the blade edge.
- Do not place the blade near a heat source.
• Cleaning procedure
Clean the blade edge with a cloth moistened with water and squeezed lightly.
e-STUDIO2555C/3055C/3555C/4555C/5055C
PREVENTIVE MAINTENANCE (PM)
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
7 - 28