Toshiba e-STUDIO 2555C Service Manual page 892

Cause/Section Step
Fuser unit 1
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Check Item
Fuser unit guide rail
[4]
[3]
[2]
[1]
Fig.8-47
8 - 336
Measure
Adjust the fuser unit guide rail (Fig.8-
47 )
1. Take off the fuser unit.
2. Loosen the 1 screw [1] of the front
guide rail in the fuser unit.
3. Remove 1 screw [2] and attach it to
the screw hole for adjustment [3].
4. Move the guide rail downward by 1
mm.
- Moving it by 1 mm changes the
screw in the trailing edge by
0.65 mm.
- There is 0.5-mm scale [4].
5. Tighten the 1 screw [1] of the front
guide rail in the fuser unit.
6. Install the fuser unit.
- Check that the image on the
paper trailing edge is skewed by
1 mm or less after the
adjustment.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved