Toshiba e-STUDIO 2555C Service Manual page 268

(4) Remove 1 screw and take off the front drive
roller bracket [1] on the front side.
(5) Using the material that is packed with the
transfer belt (service part), stand the transfer
belt unit [1] on the waste toner box [2].
Notes:
Use 1 piece of white urethane foam (138 x
138 x 25 mm) with a 30 mm diameter hole.
Notes:
When installing, make sure that the
[1] of the transfer belt unit is aligned with the
mark [2] of the waste toner box.
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
mark
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 132
Fig. 4-365
Fig. 4-366
Fig. 4-367