Toshiba e-STUDIO 2555C Service Manual page 293

(13) Remove 3 screws.
(14) Remove the E-ring [1], gear [2], pin, and
bushing.
(15) Remove the plate [3].
(16) Remove the fuser belt unit [1].
(17) Remove the collar [1], bearing [2], and gear
[3] from the rear side.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-439
Fig. 4-440
Fig. 4-441
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 157
DISASSEMBLY AND REPLACEMENT
4