Toshiba e-STUDIO 2555C Service Manual page 483

Twin color print
Color specified Item to be adjusted
for twin color
Black
print
Black 8023-0
8023-1
8023-2
Cyan
Magenta
Yellow
Red
Green
Blue
Notes:
Be sure that this adjustment be made after performing  P. 6-51 "6.3.1 Automatic gamma
•
adjustment".
• Changing the adjustment setting influences the adjacent density area slightly.
E.g.: When the value of the medium density is larger, the adjacent areas in the low density and
high density range will become slightly darker.
<Procedure>
The procedure is the same as that of  P. 6-54 "6.3.2 Gamma balance adjustment (Black Mode)".
<Range of the density area (low density, medium density, high density)>
The color from the 1st to the 7th stage (low density), from the 8th to the 11th stage (medium density),
from the 12th to the 13th stage (high density) in "Patch chart for gamma adjustment ([71] [FAX])" output
in  P. 6-51 "6.3.1 Automatic gamma adjustment" can be used as a guide for the range of the density
area influenced by the adjustment with the printer driver and the change of the adjustment value (low
density, medium density, and high density (Refer to  P. 6-55 "Fig.6-22 ").
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Yellow Magenta
-
-
-
- 8024-0 8025-0
8024-1 8025-1
-
- 8024-2 8025-2
- 8027-0 8028-0
- 8027-1 8028-1
- 8027-2 8028-2
- 8030-0 8031-0
- 8030-1 8031-1
- 8030-2 8031-2
- 8033-0 8034-0
- 8033-1 8034-1
- 8033-2 8034-2
- 8036-0 8037-0
- 8036-1 8037-1
8036-2 8037-2
-
- 8039-0 8040-0
- 8039-1 8040-1
- 8039-2 8040-2
6 - 57
Remarks
Cyan
- - The larger the value is, the
darker the color to be adjusted
- -
becomes.
- -
Acceptable values: 0 to 255
8026-0
(Default: 128)
8026-1
8026-2
8029-0
8029-1
8029-2
8032-0
8032-1
8032-2
8035-0
8035-1
8035-2
8038-0
8038-1
8038-2
8041-0
8041-1
8041-2
e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
6