(5)
Release 3 latches [1] on the right, and then
tilt the LED print head unit [1] toward the left
side to remove it.
Notes:
•
Make sure that the plate spring [1] on the
front of the LED print head unit is placed
in the groove [2].
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 30
Fig. 4-80
Fig. 4-81
Fig. 4-82