Toshiba e-STUDIO 2555C Service Manual page 669

Check item
Paddle home position sensor
Paddle motor
Finisher controller PC
board
Parts to be replaced
Paddle motor
Paddle home position sensor
Finisher controller PC board
[ED16] Buffer tray home position error
Classification
Other paper jam
MJ-1107
Check item
Buffer tray guide
Buffer tray home position
sensor
Buffer tray guide motor
Finisher controller PC
board
Parts to be replaced
Buffer tray home position
sensor
Buffer tray guide motor
Finisher controller PC board
MJ-1108
Check item
Buffer tray guide
Buffer tray home position
sensor
Assist arm motor
Buffer tray guide motor
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Measures
Check if the connectors on the finisher controller PC board are
disconnected from the paddle home position sensor (S3) and the
paddle motor (M3), or the harnesses are open circuited. Correct if
any.
Remark
Error content
Buffer tray home position error
Measures
Open and close the buffer tray guide. If there is any mechanical
problem, fix its mechanism.
Check if the connectors on the finisher controller PC board are
disconnected from the buffer tray home position sensor (S5) and
the buffer tray guide motor (M3), or the harnesses are open
circuited. Correct if any.
Remark
Measures
Open and close the buffer tray guide.
Fix any mechanical problem.
Check if there is a disconnection of the connector, incorrect
installation or breakage of the buffer tray home position sensor (S5).
If there is, reinstall the sensor correctly or replace it.
Check if the connector (CN11) on the finisher controller PC board is
disconnected from the buffer tray home position sensor (S5) and
the harnesses are open circuited. Correct if so.
Check if the connector (CN13) on the finisher controller PC board is
disconnected from the assist arm motor (M10) and the harnesses
are open circuited. Correct if so.
Check if the connector (CN11) on the finisher controller PC board is
disconnected from the buffer tray guide motor (M2) and the
harnesses are open circuited. Correct if so.
8 - 113
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8