Toshiba e-STUDIO 2555C Service Manual page 311

(8) Remove the clip [1] and gear [2].
(9) Remove 3 screws and take off the bracket
[1], bushing, and clip.
(10) Remove the E-ring [1] and take off the lever
[2].
Notes:
When installing the one-way clutch [3], align
the direction of the arrow shown on the one-
way clutch [3] with that on the plate.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-486
Fig. 4-487
Fig. 4-488
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 175
DISASSEMBLY AND REPLACEMENT
4