Toshiba e-STUDIO 2555C Service Manual page 672

Check item
Finisher
Paper holding home position sensor
(S38)
Saddle controller board
Replace parts
Paper holding home position sensor
(S38)
Saddle controller board
[EF14] Saddle paper exit jam
MJ-1108
Classification
Finisher jam (Saddle section)
Check item
Finisher
Exit sensor (S31)
Saddle controller board
Replace parts
Exit sensor (S31)
Saddle controller board
[EF15] Saddle Stitch Finisher side alignment motor home position detection abnormality
MJ-1108
Classification
Finisher jam (Saddle section)
Check item
Finisher
Side alignment home position sensor
(S36)
Side alignment motor (M15)
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
• Is there any mechanical problem when the paper holding
cam is rotated?
• Sensor check
• Connector check
• Harness check
• Connector check (CN8)
• Board check
Outputting paper is not completed within a fixed time.
• Is there any paper remaining in the paper transport path of
the equipment or the saddle stitch section of the Finisher?
• Sensor check
• Connector check
• Harness check
• Connector check (CN19)
• Board check
The side alignment motor home position cannot be detected.
• Is there any mechanical problem when the jog is moved?
• Sensor check
• Connector check
• Harness check
• Motor check
• Connector check
• Harness check
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 116
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures