Toshiba e-STUDIO 2555C Service Manual page 916

(9) When the Fax Unit (GD-1320) is installed, perform "Fax Set Up" (1*-100) and "Clearing the
image data" (1*-102). Then turn the power OFF.
(10) Start up with the Setting mode (08).
(11) Perform the panel calibration (08-9050).
1.Touch the center of "+" mark displayed on the upper left of the LCD.
2.Touch the center of "+" mark displayed on the upper right of the LCD.
3.Touch the center of "+" mark displayed on the lower left of the LCD.
4.Touch the center of "+" mark displayed on the lower right of the LCD.
(12) Check the system software version (08-8952).
Confirm the version displayed on the LCD, and then press the [OK] button.
(13) Initialization of NIC information (08-9083).
(14) Turn the power OFF.
[F] Reset user's setting items and restore data/information
Ask the user (machine administrator) to reset the user's setting items and to restore data or information.
Refer to the following for the reset and restore:
Items to reset/restore
Printer driver
F-code information, Template
registering information, Address
book data
Department management data
Image data in the Electronic Filing
• When the SSL is enabled, perform the setting of the following items again with "Self-signed
certificate" of TopAccess.
- Country Name
- State or Province Name
- Locality Name
- Organization Name
- Organizational Unit Name
- Common Name
- Email Address
• When wireless LAN is used, perform the setting again on the LCD panel. (only when security
with a certificate is used) Also, upload the following certificate file with "Install Certificate for
Wireless LAN" of TopAccess.
- CA certificate
- User certificate
[G] Reset "FUNCTION LIST FOR MAINTENANCE"
(1) Print out the "FUNCTION LIST FOR MAINTENANCE" list after the formatting. For how to print it
out, refer to [B]Print out "FUNCTION LIST FOR MAINTENANCE".
(2) While pressing [1] and [3] simultaneously, turn the power ON. (Fax Function Mode)
(3) Compare the lists which were printed before and after the formatting to check the setting items
having the different setting values. Set the value which was set before the formatting.
(4) Turn the power OFF.
e-STUDIO2555C/3055C/3555C/4555C/5055C
REPLACEMENT OF PC BOARDS/HDD
Upload them in the "Administrator" menu of TopAccess.
Restore them in the "Administrator" menu of TopAccess
Import them in the "Administrator" menu of TopAccess.
Upload them in the "e-Filing" of TopAccess.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
9 - 20
Method