Toshiba e-STUDIO 2555C Service Manual page 259

(4) Remove 2 screws.
(5) Remove the harness, and then release 2
latches, and then remove the plate [1].
(6) Remove the developer unit cooling fan [1].
Notes:
• When installing, place the developer unit
cooling fan [1] as shown in the right
figure.
• Before installing the plate, pass the
harness through the duct window.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-341
Fig. 4-342
Fig. 4-343
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 123
DISASSEMBLY AND REPLACEMENT
4