Toshiba e-STUDIO 2555C Service Manual page 74

[C] Misfeed in equipment
• Exit sensor (S13) detects jamming of the leading edge of paper

Registration motor (M14) turned ON

Fixed time
Exit sensor (S13) turned ON
If the exit sensor (S13) is not turned ON after
a fixed time,

Paper jam (E010) The copying operation is
stopped.
• Exit sensor (S13) detects jamming of the trailing edge of paper
Registration motor (M14) turned OFF

Fixed time.
Exit sensor (S13) turned OFF
If the exit sensor (S13) is not turned OFF a
fixed time

Paper jam (E020) The copying operation is
stopped.
• Immediately after the power ON

Any of all sensors on paper transport path detects paper (ON)

Paper jam (E030)
• Front cover is opened during copying

Paper jam (E410)
e-STUDIO2555C/3055C/3555C/4555C/5055C
OUTLINE OF THE MACHINE
Registration motor
Exit sensor
Timer
Fig. 3-14
Registration motor
Exit sensor
Timer
Fig. 3-15
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
3 - 34
ON
ON
0 Fixed time
Paper jam ( E010 )
OFF
ON
Fixed time
Paper jam ( E020 )