Toshiba e-STUDIO 2555C Service Manual page 917

[H] Reset "FUNCTION" list
Reset the fax function by referring to the "function list" that was printed out in [C]Print out "FUNCTION"
list.
(1) Press the [USER FUNCTIONS] button.
(2) Press the [ADMIN] button, enter the password, and then press the [ENTER] button.
Notes:
Explain the user (machine administrator) about the next operation and ask him/her to enter his/
her password.
(3) Press the [FAX] button and then the [TERMINAL ID] button to set each item.
(4) Press the [INITIAL SETUP] button to set each item.
[I] Adjust image quality
(1) Start up with the Adjustment mode (05).
(2) Enter the password, and then press the [OK] button.
(If the password is not set for Service, press the [ENTER] button without entering anything.)
(3) Perform "Automatic gamma adjustment (PPC)" (05-7869).
 P. 6-27 "6.2.1 Automatic gamma adjustment"
(4) Perform "Automatic gamma adjustment (PRT)" (05-8008, 8009).
 P. 6-51 "6.3.1 Automatic gamma adjustment"
(5) Turn the power OFF.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
9 - 21
REPLACEMENT OF PC BOARDS/HDD
9