Maximum Text Density Adjustment - Toshiba e-STUDIO 2555C Service Manual

Notes:
Even if a large value is set, the image does not drastically appear dark (the amount of toner
adhering is not increased).
<Procedure>
The procedure is the same as that of  P. 6-29 "6.2.2 Density adjustment".
6.2.13

Maximum text density adjustment

The maximum text density in each color in the full color mode (Text/Photo, Text, Map mode) can be
adjusted.
<Adjustment Mode (05)>
Color Code
Yellow 7889
Magenta 7890
Cyan 7891
Black 7892
Make a test copy and compare the image obtained with the current settings; if necessary, make
adjustments according to the following procedure.
Notes:
Be sure that this adjustment is made after performing  P. 6-27 "6.2.1 Automatic gamma
adjustment".
<Procedure>
The procedure is the same as that of  P. 6-29 "6.2.2 Density adjustment".
6.2.14 Text/Photo reproduction level adjustment
Text/Photo reproduction level at the Full color mode and Auto color mode can be adjusted.
Text/Photo reproduction level adjustment can be switched to "Photo oriented 1", "Photo oriented 2",
"Text oriented 1" or "Text oriented 2" in the following codes.
<Adjustment Mode (05)>
Mode
Custom
Text/ mode
Photo (Text/Photo
base)
7840 7841
Notes:
• The text reproduction level is lower when the mode is switched from the default value to the
Photo oriented.
• When you change the setting from the default value to Text oriented, noise occurs in a printed
photo with a few lines.
• The codes for the user custom setting are enabled only when the base original mode of the
user custom mode is Text/Photo.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Item to be adjusted
Maximum text density
Item to be
Red Seal
adjusted
Color
Mode
7842 Text/Photo
reproduction level
adjustment
6 - 39
Remarks
The larger the value is, the darker the maximum
text density of each color to be adjusted
becomes.
Acceptable values: 0 to 10 (Default: 5)
Contents
0, 5: Default
The smaller the value, the higher the
printed image reproduction level becomes
(Photo oriented). The larger the value, the
higher the text reproduction level becomes
(Text oriented).
e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
6