Toshiba e-STUDIO 2555C Service Manual page 615

Check item
Registration sensor
DRV board
Parts to be replaced
ADU entrance sensor
LGC board
ADU board
DRV board
Registration sensor
Roller
When the paper is fed from any of the 2nd drawer, PFP or LCF:
Check item
Feed sensor
2nd drawer paper feed sensor
DRV board
LGC board
Parts to be replaced
Feed sensor
Paper feed sensor
LGC board
DRV board
Roller
[EB60] Paper remaining on the transport path due to multiple feeding
Classification
Paper transport jam
Check item
Registration sensor
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
• Sensor check (Perform the input check: 03-[ALL]OFF/[9]/[A])
• Connector check (J1077, J1114, CN462)
• Harness check
• Board check
• Connector check (CN462, CN450, CN451)
• Harness check
Replace it if it is worn out.
• Sensor check (Perform the input check: 03-[ALL]OFF/[9]/[B])
• Connector check (J1078, J1114, CN462)
• Harness check
• Sensor check (Perform the input check: 03-[FAX]ON/[4]/[D])
• Connector check (J1085, J1111, CN454)
• Harness check
• Board check
• Connector check (CN454, CN462, CN450, CN451)
• Harness check
• Board check
• Connector check (CN361, CN362)
• Harness check
Replace it if it is worn out.
• Sensor check
(Perform the input check: 03-[ALL]OFF/[9]/[A])
• Connector check (CN462, J1114, J1077)
• Harness check
8 - 59
Measures
Remark
Measures
Remark
Error content
Measures
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8