Download Print this page

Toshiba e-STUDIO 2555C Service Manual page 567

Multifunctional digital color systems
Hide thumbs Also See for e-STUDIO 2555C:

Advertisement

Error code
Classification
EA31
Finisher jam
(Finisher section)
EA32
EA40
EA50
EA60
EA70
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Contents
Paper transport remaining jam in the Finisher:
Paper is detected in the entrance path sensor
or middle path sensor when the power is
turned ON or the cover is closed. [MJ-1036]
Transport path paper remaining jam: Paper is
detected by the transport sensor when the
power is turned ON. [MJ-1107/1108]
Exit paper remaining jam in the Finisher: Paper
is detected in the finishing tray sensor when
the power is turned ON. [MJ-1036]
Exit paper remaining jam: The paper is
remaining on the finishing tray when the power
is turned ON. [MJ-1107/1108]
Finisher cover open jam:
(1) A paper jam occurs when any of the covers
is opened during the transporting of paper in
the Finisher (until the paper exit is completed
after the B command has been received).
(2) A paper jam occurs when the supplying of
the voltage of 24V is stopped during the
transporting of paper. [MJ-1036]
Cover open error:
(1) The front cover or stationary tray is opened
during paper transport.
(2) A paper jam occurs when the supplying of
the voltage of 24V is stopped during the
transporting of paper. [MJ-1107]
(1) The front upper cover or stationary tray is
opened during paper transport.
(2) A paper jam occurs when the supplying of
the voltage of 24V is stopped during the
transporting of paper. [MJ-1108]
Stapling jam: Stapling is not performed
properly. [MJ-1036]
Stapling jam: Stapling is not performed
properly. [MJ-1107/1108]
Early arrival jam: The entrance path sensor
detects the paper earlier than a specified
timing. [MJ-1036]
Early arrival jam: The entrance sensor detects
the paper earlier than a specified timing. [MJ-
1107]
Early arrival jam: The feed sensor detects the
paper earlier than a specified timing. [MJ-1108]
Stack exit belt home position error: The stack
exit belt is not at the home position. [MJ-1107/
1108]
8 - 11
Troubleshooting
P. 8-91
P. 8-91
P. 8-92
P. 8-94
P. 8-95
P. 8-95
P. 8-96
P. 8-96
P. 8-98
P. 8-99
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8

Hide quick links:

Advertisement

loading