Toshiba e-STUDIO 2555C Service Manual page 244

Notes:
When replacing the parts or performing preventive maintenance, apply white grease (Molykote
EM-30L) as noted below.
[1] Apply a thin coat of the grease to whole outer circumference of each shaft.
[2] Apply a thin coat of the grease to the tooth surface of each gear.
[3] Apply a coat of the grease to the whole sliding surface of each coupling.
[4] Apply a thin coat of the grease to whole outer circumference of each shaft.
[1]
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
[2]
[4]
Fig. 4-307
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 108
[3]