Notes:
•
"—" is always displayed at the drive counts section for the reversing automatic document feeder
(RADF) and feed unit.
•
"—" is displayed at the numeric section for the paper source which is not installed since the paper
source is different depending on the structure of options.
2. Sub screen
9
Displaying of the number of print / develop pages and drive counts and previous
1
replacement date for a chosen sub unit
Moving to the next/previous page
2
Displaying of the standard number of drive counts to replace the sub unit (parts)
3
Displaying of the present drive counts
4
"*" is displayed next to the present number when the number of drive counts has exceeded
its PM standard number.
Displaying of the standard number of print / develop pages to replace the sub unit (parts)
5
Displaying of the present number of print / develop pages
6
"*" is displayed next to the present number when the number of print / develop pages has
exceeded its PM standard number.
Displaying of the sub unit (parts) name
7
Moving to the clear screen to clear the selected unit (parts) counters
8
Back to the main screen
9
e-STUDIO2555C/3055C/3555C/4555C/5055C
PREVENTIVE MAINTENANCE (PM)
1
8
6
5
7
Fig. 7-4
7 - 8
4
3
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
2