Toshiba e-STUDIO 2555C Service Manual page 133

The main switch of the equipment is turned OFF. Since DC voltage is not supplied to each board,
the equipment is not operable.
- Normal state (including Energy saving mode)
The main switch of the equipment is turned ON and DC voltage is supplied to each board. When
the cover of the equipment is closed, 24V DC voltage is supplied and the equipment enters into
the ready/printing state.
- Sleep mode
Since +24VD DC voltages are not supplied but +12VA and +5VS DC voltages only, the
equipment does not enter into the ready state.
- Super Sleep mode
Only DC voltage and +5VS are output from the power supply unit. The [ON/OFF] button is
monitored and the LED of the main switch is lit.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
3 - 93
OUTLINE OF THE MACHINE
3