Toshiba e-STUDIO 2555C Service Manual page 934

(3) Enter the password, and then press the [OK] button.
(If the password is not set for Service, press the [ENTER] button without entering anything.)
(4) Set "Line adjustment mode" to "0: For factory shipment" (08-9010).
Notes:
Be sure to change the setting of "Line adjustment mode" (08-9010) to "0: For factory shipment".
Since "1: For line" is set for "Line adjustment mode" in [B] Initialize LGC board in EEPROM (for
LGC board) supplied as a service part, number of prints is not counted unless it is changed.
e-STUDIO2555C/3055C/3555C/4555C/5055C
REPLACEMENT OF PC BOARDS/HDD
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
9 - 38