Toshiba e-STUDIO 2555C Service Manual page 279

(5) Slide the harness guide [1] upward and tilt it
to the near side.
(6) Remove 2 power supply terminals [1].
Notes:
The number of the springs for the left side
power supply terminal differs from the one for
the right side power supply terminal.
Left side (see from rear side): 3 springs
Right side (see from rear side): 2 springs
(7) Remove the drum switching unit.
 P. 4-103 "4.6.25 Drum switching unit"
(8) Remove 7 screws, disconnect the 3
connectors [1], release the upper hook, and
then take off the drum and TBU drive unit [2].
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 4-397
Fig. 4-398
Fig. 4-399
e-STUDIO2555C/3055C/3555C/4555C/5055C
4 - 143
DISASSEMBLY AND REPLACEMENT
4