Toshiba e-STUDIO 2555C Service Manual page 789

[F130] Invalid MAC address
Classification
Other service call
Check item
Setting
[F131] Error due to damage to filtering setting file
Classification
Other service call
Check item
Setting
Parts to be replaced
HDD
[F140] ASIC format error
Classification
Other service call
Check item
SYS board
Main memory
Replace parts
Main memory
SYS board
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Invalid MAC address
Compare the serial number of the equipment with a number
displayed with 08-9601. If they are different, enter the
correct serial number at 08-9601, 08-9083.
The filtering function is not working properly due to the damage
to the file for the filtering setting.
1. Check the bad sector of the HDD (08-9072). If the result
is "NG", replace the HDD.
Notes:
It may take more than 30 minutes to finish the
checking.
2. Perform [3] + [C] + [POWER] → [3], and then reinstall
the HDD software.
Notes:
User data will be deleted when [3] + [C] + [POWER]
→ [3] is performed.
ASIC formatting fails or memory acquiring fails when software
is formatted
• Connector check
• Board check
• Check the installation
• Main memory check
8 - 233
Contents
Measures
Contents
Measures
Remarks
Contents
Measures
Remarks
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8