Toshiba e-STUDIO 2555C Service Manual page 75

• Registration sensor (S19) detects jamming of the leading edge of paper:
The registration sensor (S19) is not turned ON in a fixed period of time after the leading edge of
paper passed the transport roller.

Paper jam (E200, E210, E270, E300, E330 and E3C0)
• During paper feeding from ADU:
The registration sensor (S19) is not turned ON in a fixed period of time after the ADU motor
(M12) is turned ON.

Paper jam (E110)
• During paper transporting from ADU:
ADU entrance/exit sensors (S14/S15) do not detect the paper at the fixed timing

Paper jam (E510 and E520)
• During paper reversing:
The reverse sensor (S26) does not detect the paper at the fixed timing

Paper jam (E570 and E580)
• During paper feeding from the equipment or PFP:
The transport sensor (S19), or the 2nd drawer paper feed sensor (S32) is not turned ON in a
fixed period of time after the feed clutch is turned ON.

Paper jam (E220, E310, E320, E340 to E360, E3D0 and E3E0: Error code defers depending on
the paper source.)
[D] No toner in the cartridge
Toner density becomes low

Auto-toner sensor (S1/S2/S3/S4) detects the absence of the toner

© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
3 - 35
OUTLINE OF THE MACHINE
3