Toshiba e-STUDIO 2555C Service Manual page 150

Remove 4 screws and take off the CCD lens
(3)
unit [2].
Notes:
1. The CCD lens unit is adjusted finely, so
the re-adjustment or replacement of some
parts are impossible in the field. The lens
unit must be replaced on a unit basis.
2. Handle the lens unit with care. Do not
hold the adjustment unit or lens.
3. Count the number of lines [3] and write it
down for later reference before removing
the CCD lens unit. When installing the
CCD lens unit, the same number of lines
needs to be visible.
4. When replacing the lens unit, do not
touch the screws (7 places).
e-STUDIO2555C/3055C/3555C/4555C/5055C
DISASSEMBLY AND REPLACEMENT
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
4 - 14
[2]
Fig. 4-35
Fig. 4-36
Fig. 4-37