Toshiba e-STUDIO 2555C Service Manual page 903

(2) Remove 8 screws and slide the LGC board
[1] toward the right side to remove it.
Notes:
The LGC board to be installed differs
depending on the models. Due to this, before
replacing, be sure to check the color of the
identification label on the LGC board to
install the corresponding one in the
equipment.
• 25ppm: Brown
• 30ppm: White
• 35ppm: Yellow
• 45ppm: Pink
• 50ppm: Blue
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-18
e-STUDIO2555C/3055C/3555C/4555C/5055C
REPLACEMENT OF PC BOARDS/HDD
9 - 7
9