Cause/Section
Step
Developer unit
1
Is the layer of the developer material
on the developer sleeve where the
density is uneven thin or lacking?
2
Does uneven image density occur
again?
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Check item
8 - 313
Measures
•
Remove the foreign matter in the
developer unit.See "2. Removal of
foreign matter in the developer
unit" in P. 7-23 "7.6.8
Developer unit (K, Y, M, and C)".
•
Clean the developer unit.See "1.
Cleaning" in P. 7-23 "7.6.8
Developer unit (K, Y, M, and C)".
See work flow diagram in P. 7-12
"7.5 Work flow of parts replacement".
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
8