Cause/Section
Step
Parameter
2
adjustment
value
3
* If the trouble is not solved at the step 1 and the step 2 or followings (excluding the parameter
adjustment) are performed, make sure to perform "Enforced performing of image quality closed-loop
control" and then "Automatic gamma adjustment" after taking a measure.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Check item
Check the image
Check the sharpness
processing
adjustment value.
parameters.
Adjust the image
While checking the above
processing
encircled image A, increase
parameters.
sharpness by sharpness
adjustment.
8 - 287
Measures
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Remarks
8