Toshiba e-STUDIO 2555C Service Manual page 469

6.2.19 Twin color copy / mono color copy adjustment
The density of the color specified on the touch panel is adjusted in the monocolor copy or twin color
copy mode. This adjustment is reflected to both monocolor and twin color copying.
<Adjustment Mode (05)>
Code
Y
Magenta 7644-0 7644-1 7644-2 7644-3 The larger the value is, the darker the density
Yellow 7645-0 7645-1 7645-2 7645-3
YellowGreen 7646-0 7646-1 7646-2 7646-3
Cyan 7647-0 7647-1 7647-2 7647-3
Pink 7648-0 7648-1 7648-2 7648-3
Red 7649-0 7649-1 7649-2 7649-3
Orange 7650-0 7650-1 7650-2 7650-3
Green 7651-0 7651-1 7651-2 7651-3
Blue 7652-0 7652-1 7652-2 7652-3
Purple 7653-0 7653-1 7653-2 7653-3
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in the code of the mode to be adjusted (color and original mode) and press the [START]
button.
(3) Select the density area to be adjusted with digital keys (0, 1, 2 or 3), and press the [START]
button.
0: Y
1: M
2: C
3: K
(4) Key in an adjustment value. (To correct the value once keyed in, press the [CLEAR] button.)
(5) Press the [OK] or [INTERRUPT] button to store the value in memory.
→ The equipment goes back to the ready state.
(6) For resetting the value, repeat step (2) to (5).
(7) Turn ON the power of the equipment and make a copy.
(8) If the desired image quality has not been attained, repeat step (1) to (7).
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Subcode
M C K
becomes, and the smaller the value is, the
lighter the density becomes. When "255" is
set, the specified solid color is used for
printing. When "0" is set, nothing is printed.
For example, in case of "Red", the color when
"Red" is specified becomes blue if you set as
follows:
(Y) 7649-0=0
(M) 7649-1=128
(C) 7649-2=255
Acceptable value: 0 to 255 (Default: 128)
6 - 43
Remarks
Notes:
• If a large value is set for all of YMCK,
offsetting may occur. Make an
adjustment while checking the
image.
• If "0" is set for all four colors of
YMCK, when a color is specified for
the adjustment item, nothing is
printed.
e-STUDIO2555C/3055C/3555C/4555C/5055C
SETTING / ADJUSTMENT
6