Toshiba e-STUDIO 2555C Service Manual page 995

Item
1. SYSTEM FIRMWARE(OS Data)
2. ENGINE FIRMWARE
3. SCANNER FIRMWARE
4. SYSTEM SOFTWARE (HD Data)
5. RADF FIRMWARE
6. PFC FIRMWARE
7. FINISHER FIRMWARE
8. SADDLE FIRMWARE
9. PUNCH FIRMWARE
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
Status display during update
SYSTEM FIRMWARE(OS Data) update in
progress
ENGINE FIRMWARE
SCANNER FIRMWARE
SYSTEM SOFTWARE (HD Data) update in
progress
RADF FIRMWARE update in progress
PFC FIRMWARE update in progress
FINISHER FIRMWARE update in progress
SADDLE FIRMWARE update in progress
PUNCH FIRMWARE update in progress
(8) "Update successfully completed Restart the MFP" is displayed at the bottom of the LCD screen
after the updating is completed properly.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
Updating System firmware
Updating Engine firmware
Updating Scanner firmware
Updating System software
Updating RADF firmware
Updating PFC firmware
Updating Finisher firmware
Updating Saddle firmware
Updating Punch firmware
update in progress
update in progress
Fig.11-8
11 - 11
Remarks
Status display when update is completed
SYSTEM FIRMWARE(OS Data)
ENGINE FIRMWARE
SCANNER FIRMWARE
SYSTEM SOFTWARE (HD Data)
RADF FIRMWARE Completed
PFC FIRMWARE Completed
FINISHER FIRMWARE
SADDLE FIRMWARE Completed
PUNCH FIRMWARE Completed
e-STUDIO2555C/3055C/3555C/4555C/5055C
Completed
Completed
Completed
Completed
Completed
FIRMWARE UPDATING
11