The Copy Has Lines; The Copy Has Dark Specks Or Spots; The Edge Of The Copy Is Dirty; The Image On The Copy Is Not Aligned Properly - Minolta EP2050 Operator's Manual

186
1. When this Type of Copy is Produced
Symptom

The Copy has lines.

The Copy has dark specks or spots.

The Edge of the Copy is dirty.

The Image on the Copy is not aligned
properly.
The Corona Units are dirty.
1139O1670A
The Original Glass is dirty.
The Original Pad or Document Feed Belt is
dirty.
The original is very thin or highly
transparent.
The original is two-sided.
1139O1660A
The Original Pad or Document Feed Belt is
dirty.
You have selected a paper size larger than
the original.
(Zoom Ratio is set at full size 100%)
The original is not placed in the correct
position. (Zoom Ratio is set at full size
100%.)
The reduction ratio selected is not in accord
with the copy paper size.
1139O1690A
(When doing manual reduction copying.)
The original is not placed in the correct
position.
The originals may not be suitable for use in
the AF-3/AFR-7.
(When AF-3/AFR-7 is being used.)
The Original Glass is dirty. (When
AF-3/AFR-7 is being used.)
1139O1680A
Possible Cause