Toner Replenisher - Minolta EP3050 Operator's Manual

4. Toner Replenisher

The copier tends to exhaust the supply of toner rapidly when making a number of copies from an
original with dark solid areas such as a photo. As a result, the image density of the copy will
become lighter. In such a case, you can use the Toner Replenisher function to regain the normal
image density quickly.
Original
Activating the Toner Replenisher
Press the User Mode Key.
1
User Mode
Touch

Toner Replenisher

2
User Mode
Select a function by pressing the
key.
Data Send
Job Memory Zoom Mem-
Input ory Input
Toner Re- Drum De-
Plenisher humidifier
The copier immediately starts a toner
replenishing sequence which will last
for about 2 minutes. It is also possible
to change the copying functions while
the copier is in this sequence.
Copy
Toner Re-
plenisher
1134P356CA
.
Exit
Meter
Count
User's
Choice
1134P359CA
Copy Made After
Toner Replenisher
Useful Tip
If you continue making copies after the
image density has become lighter, the
copier will gradually recover the normal
image density.
NOTES
Toner Replenisher cannot be started
while the copier is warming up.
Do not turn the Power Switch OFF or
swing down the Front Door while the
copier is replenishing toner.
Toner is not replenished if the image
density is sufficiently high.
119
1134P373CA