Auxiliary Toner Replenishing Mode (Increasing The Image Density) - Minolta EP2050 Operator's Manual

130
2. Auxiliary Toner Replenishing Mode
2. (Increasing the Image Density)
Job
Memory
Input
Meter
Count
OHP
Inter-
leaving
Page
Insertion
Toner Book 1
Book 2
Drum
Dehumidify
Display
Original
Even if you continue making copies after the image density has become lighter,
the copier will gradually recover the normal image density. The Auxiliary Toner
Replenishing Mode can, however, be used to obtain the normal image density
more quickly.
Toner
NOTES
The copier cannot be set into the Auxiliary Toner Replenishing Mode while it
is warming up.
Do not turn the Power Switch OFF, or open a copier Door while in the
Auxiliary Toner Replenishing Mode.
The copier tends to exhaust the supply of
Zoom
Auto Size
toner rapidly when making a number of
Memory
copies from an original with dark solid areas.
As a result, the image density of the copy
Cover Erase 1
(Front)
will become lighter. In such a case, you can
Erase 2
Cover
(Front Back) set the copier into the Auxiliary Toner
&
Replenishing Mode.
Erase 3
Margin 1
Erase 4
Margin 2
OK
1136P354CA
1136P354CA
Copy
1136P356CA
1136P356CA
Press the Auxiliary Toner
Replenishing Key.
This causes the copier to initiate a
toner replenishing sequence.
Copy Made After
Auxiliary Toner
Replenishing
1136O177CA