Toner Replenisher - Minolta EP4000 Operator's Manual

3. Meter Count, Toner Replenisher, and Drum Dehumidifier
Meter Count
Touching
Meter Count
Total Counter
Shows the total number of copies made
since the installation of the copier.
Size Counter
Shows the number of copies made on
copy paper of a preset size. (The size
will be set by your Technical
Representative.)

Toner Replenisher

Touching
Toner Replenisher
The copier tends to exhaust the supply of toner rapidly when making a number of copies from an
original with dark solid areas such as a photo. As a result, the image density of the copy will
become lighter. In such a case, you can use Toner Replenisher to regain the normal image
density quickly.
NOTES
Do not turn OFF the Power Switch or open the Front Door while the copier is
replenishing toner.
Toner is not replenished if the image density is sufficiently high.
The toner replenishing sequence ends automatically.
Drum Dehumidifier
Touch
Drum Dehumidifier
During times of high humidity or when there are sudden rapid changes in humidity (especially
when you are using a heater in winter), condensation
*2
Drum , resulting in blotchy copies. In such instances, use Drum Dehumidifier to dry the
surface of the PC Drum.
*1
Condensation:
A phenomenon in which small drops of water are formed on cold surfaces, such as the
surface of the PC Drum.
*2
PC Drum:
Functions in the copier as film in a camera.
Useful Tip
A copy cycle can be initiated even while the copier is in the Drum Dehumidifier cycle.
allows you to check the total count of each of the following five counters.
sets the copier into the auxiliary toner replenishing mode.
to activate the Drum Dehumidifier function.
2-Sided Total
Shows the number of 2-sided copies.
2-Sided Size
Shows the number of copies made on
copy paper of a preset size (the same
size as set for Size Counter).
# of Active Accounts
Shows the total number of copies made
by the active accounts.
*1
can form on the surface of the PC
83