Connecting The Power Cable; Turning On The Power - MIMAKI UJV100-160 Operation Manual

1.2 Connecting the Power Cable

1
Check to confirm that the main power supply is turned off.
2
Insert the cable band to the machine.
3
Plug the power cable into the inlet of the machine.
4
Secure the power cable to the cable band.
• Pass the power cable through the clamp and clamp until it clicks into place.
5
Plug the power plug into the power outlet.
• Do not handle the power plug with wet hands. Disregarding this precaution may result in
electric shock.

Turning On the Power

• The ink used in this machine is warmed before printing. The machine is inoperable while the ink
is warmed.
• Close the front cover and maintenance covers. Leaving any of the covers open will disable the
automatic maintenance function (including nozzle clogging prevention function and waste ink
draining channel cleaning function). This will increase the risk of failure or ejection failures (e.g.,
nozzle clogging or deflection).
1
Check to confirm that the main power supply is turned on.
• If the main power supply switch is not turned on, set to "I".
Power cable
Cable band
Power plug
Power outlet
Main power supply switch
31
Chapter 1 Before Use
1